- Observe the established policies and procedures relating to quality management.
- Primarily responsible for the reviewing and inspection of raw materials, instruments, and manufactured goods over several departments including the turning sections, CNC, fabrication, goods receiving and fabrication as well as final check / release, during setup, in production and final approval.
- Conduct First Off ("F/O") Inspections after machine set ups, and make a final go/no-go decision as to whether to commence with production. Confirm that the customer requirements and specifications are met prior to the commencement of production by comparing F/O samples with drawings and stated requirements. Prepare slip / slide gauges and other required gauges and communicate use of gauges to operators and setters. Ensure that correct material is used as per specification and place relevant samples and gauges at the machine.
- Conduct in-process routine and ad hoc inspections in assigned areas by visually inspecting products and measuring products with measurement instruments including, but not limited to verniers, micrometers, clock gauges and thread gauges. Where appropriate compare with customer samples and issued equipment. Ensure that inspections are done at the commencement of each shift and that verification samples are provided for inspection by management.
- When, variances, deviations from specifications, discrepancies, and non-conformances are encountered: the Inspector must stop production and ensure that parts in the machine are segregated for further inspection. The inspector must be able to identify the required adjustments and changes and communicate the required changes to the setter.
- Inspect final products prior to release and make a final decision approval decision if products comply with the customer specification. Conduct visual and measurement inspections and determine the correct inspection sample. Take responsibility for the final release if product complies with the specifications. Inspect and release outsourced products prior to dispatch. Approve final products by confirming specifications.
- Ensure that the quality control reports and documentation are properly completed and up to date as required by the quality management system.
- Safeguard and use measurement equipment correctly.
- Respond to enquiries and solve problems.
- Must be able to read and interpret drawings
- Strong technical skills and accuracy in visual and instrument measurements.
- Good time management in planning and conducting inspections.
- Assertiveness and stamina.
- Meticulous and attention for detail – must be able to notice defects in products.
- Able to measurement devices and to adjust micrometers.
- Accuracy of data and records under control of the incumbent.
-
Quality Controller
1 day ago
Multipack Wipe Solutions Edenvale, South AfricaInterpretation of conformance to customer quality requirements. · - Review of Customer specifications. · - Decision of necessary inspection points. · - Decision of necessary inspection and test instructions. · - Planning, Developing, Coordinating, implementing, and maintaining th ...
-
Quality Controller
1 week ago
Afgri Isando, South AfricaTo execute quality controller of incoming raw materials, final product, and in-process samples and to capture and record analytical data and report all non-confirming results. · MINIMUM REQUIREMENTS · - Grade 12 with Mathematics · KEY PERFORMANCE AREAS · - Perform laboratory anal ...
-
Quality Controller
6 days ago
Fusion Recruitment East Rand, South AfricaMatric · - Qualified Fitter and Turner preferable · - 5 years production experience · - Conversant with the Occupational Health and Safety Act 85 of 1993 · - ISO 9001 implementation and reporting experience · - Inspect, test, and measure materials and products being · produced. · ...
-
Quality Control Technician
3 days ago
StaffCentral Consulting Bedfordview, South Africa**Job Duties/Responsibilities will include**: · Developing, introducing, monitoring and maintaining measuring systems to all internal and external customers with regard to series measurements and part · Analyzing, initiating, coordinating and implementing corrective action to qua ...
-
Quality Control
1 day ago
Wuxi-Tech Pty Ltd Johannesburg South, South Africa**Responsibilities**: · - Perform electrical tests on cables to assess their performance · - Use testing equipment and tools such as multimeters and tensile testing machines to conduct quality tests and measurements · - Identify non-conformities, defects and deviations from quali ...
-
Quality Control Monitor
1 week ago
RCL FOODS Careers Spartan, South Africa**Duties & Responsibilities**: · - Monitoring daily production processes · - Complete daily production process check sheets · - Monitoring temperature of product and of equipment · - Monitoring all foreign objects (Glass & hard, pest, metal and other) · - Monitoring packaging int ...
-
Quality Control Technician
1 week ago
Rand Refinery (Pty) Limited East Rand, South Africa**VACANCY**:QUALITY CONTROL TECHNICIAN** · **TYPE OF EMPLOYMENT**:FIXED-TERM (24 MONTHS)** · **GRADE**:B-LOWER** · **DIVISION**:QUALITY** · **CLOSING DATE**:16 JUNE 2023** · **PURPOSE OF THE POSITION** · - The position holder is responsible to inspect all final products manufactu ...
-
Quality Control Administrator
1 week ago
Talent 101 Witfield, South AfricaTo ensure all aspects of the QMS is well controlled and documented according to ISO-9001 STANDARDS. · **QUALIFICATIONS**: · - Matric · - Experience and knowledge on ISO 9001 with a minimum of 3 years' experience · - Must be proficient in MS packages. · - Excellent report writing ...
-
Quality Controller
1 day ago
Q-diligence Johannesburg, South AfricaQuality control: · QC checks online · document control · batch control and traceability · supplier quality assurance · audits · non-conformances and corrective action · HACCP · microbial testing · **Salary**: R5, R6,000.00 per month · **Education**: · - Certificate (preferred) · ...
-
Quality Controller
6 days ago
Q-diligence Johannesburg, South AfricaQuality control: · QC checks online · document control · batch control and traceability · supplier quality assurance · audits · non-conformances and corrective action · HACCP · microbial testing · **Salary**: R5, R6,000.00 per month · COVID-19 considerations: · n/a · **Education* ...
-
Quality Controller
6 days ago
Stonebridge HR Solutions Johannesburg, South AfricaGauteng, JHB - Southern Suburbs · - R R15 000 Monthly · We are looking for a **Quality Controller** for the **City Deep** area in Johannesburg South to assist in ensuring adherence to food-safety standard requirement, and meeting or exceeding both internal and external customer e ...
-
Quality Controller
1 week ago
GAP Consulting Johannesburg, South AfricaGauteng, JHB - Eastern Suburbs · - Motor Retail - Service Dept · - Market Related | Negotiable · - Job ref: GP022620/JO · - Vacancy type: Permanent · SHIFTINTOHIGHCAREER to a well-established and highly successful Dealership that requires the services of a Quality Controller · ** ...
-
Quality Control
1 day ago
Wuxi-Tech Pty Ltd Johannesburg, South Africa**Responsibilities**: · - Perform electrical tests on cables to assess their performance · - Use testing equipment and tools such as multimeters to conduct quality tests and measurements · - Identify non-conformities, defects and deviations from quality standards during inspectio ...
-
Quality Controller
6 days ago
Trading Places Recruitment Johannesburg, South Africa**Qualifications & Skills**: · Matric or NQF equivalent · Qualified Fitter and Turner (preferably) · 5 years manufacturing / engineering / production experience (Machining environment) · Conversant with the Occupational Health and Safety Act 85 of 1993 · Strong computer literacy ...
-
Quality Control
1 week ago
SiG Labour Corporate Johannesburg, South Africa**QUALITY CONTROL** - Short term contract for 2 months in Midvaal area · Must be able to sign off assembly and welding. · Structural steel knowledge. · Boiler maker inspection experience. · Assembly experience. · Surveillance floor inspection. · Data book compilation: Data book r ...
-
Quality Controller
1 day ago
Servest Careers Johannesburg, South Africa**Job Context**: · Servest Office Services, a division of Servest Pty (Ltd) has an exciting opportunity for a Quality Controller for the washroom and deep cleaning service line. The main function of the QC is to ensure that deep clean and washroom teams deliver a safe facility to ...
-
Quality Controller
6 days ago
Worldwide Positions Johannesburg, South AfricaRemuneration: · - to be discussed · - Location: · - Johannesburg, Edenvale · - Education level: · - Diploma · - Job level: · - Junior/Mid · - Type: · - Permanent · - Reference: · - #QC ER · - Company: · - Worldwide Positions · **Job description**: Responsible for sampling, measur ...
-
Quality Control
1 week ago
Curiska (Pty) Ltd Johannesburg, South AfricaThe role: · - Authorising account openings in line with procedures and SLAs with a particular focus on KYC/AML elements · - Supporting the onboarding manager to ensure the team receives ongoing training · - Managing client services projects initiatives including US TAX FORMS comm ...
-
Quality Controller
1 day ago
Isilumko Staffing Johannesburg, South AfricaWe are on the lookout for seasonal workers for one of our clients' towards Clayville. · Must reside within Tembisa or Olifantsfontein area · Should have attention to detail, warehouse experience, do random checks to ensure that no damaged stock goes out of the warehouse. · Attent ...
-
Quality Controller
1 week ago
NTT Ltd. Johannesburg, South AfricaNTT is a leading global IT solutions and services organisation that brings together people, data and things to create a better and more sustainable future. · In today's 'iNTTerconnected' world, connections matter more now than ever. By bringing together talented people, world-cla ...
Trainee Quality Controller - Edenvale, South Africa - Capricorn Components
3 days ago
Description
Specific duties :
SKILLS AND EDUCATIONAL REQUIREMENTS
Ability to communicate effectively both verbally and in writing. Matric with mathematical pass rate essential. Technical knowledge (N3 or higher) advantageous. Background in mechanical engineering (work experience) and diploma will be advantageous.
INTER-RELATIONSHIPS
Contact with all levels of personnel within the company as well as suppliers and customers when required.
WORKING CONDITIONS
MAJOR PERFORMANCE AREAS
NEEDED ATTRIBUTES
Aptitudes:
Verbal ability, ability to make calculations, ability to self- organize workload. Strong numeracy skills. Analytical and problem-solving skills.
Temperament:
Ability to perform a variety of tasks, often changing assignments on short notice. Must be assertive.
Interests:
Solving problems.
Physical Attributes:
Good eyesight as well as hand-eye coordination.
Must be able to stand for long periods of time, able to climb stairs and physically inspect machines on production floor.