Resego Matlakala

Resego Matlakala is a skilled Civil Engineering Technologist and Project Manager with 6 years of experience in delivering innovative solutions across various infrastructure projects. His expertise spans project management, geometric design, construction monitoring, and technical report writing, ensuring the successful execution of complex engineering initiatives.

• Rehabilitation of Cape Flats 1 and 2 Bulk Sewers: (Various Works Projects Assignments): Contracts 
Administrator and Designer for the rehabilitation of the Cape Flats 1 & 2 Bulk Sewers by means of 
trenchless technologies. The Cape Flats Bulk Sewer pipelines have a total length of 28km, with 
diameters varying from ND 1050mm to 1830mm. Trenchless Technologies involved included Spirally 
Wound Pipe Liner (SWP) and Cure-In-Place-Pipe (CIPP).  Total construction cost estimate in order of 
R1.5 billion. (2022 – Ongoing) 
• Trappies Sewer Rehabilitation: Construction contract administration for the rehabilitation of the 
downstream 2.3km long DN900mm Trappies outfall sewer in Strand by means of Cure-In-Place-Pipe 
(CIPP) for the City of Cape Town, for ECSA Stages 1 to 6. Total construction cost estimate is in the 
order of R120 million. (2024 – Ongoing) 
• 194C-Rietvlei Pump Station: (ECSA Stages 1–4) Design of the Rietvlei outgoing rising main, 
including horizontal and vertical alignment, hydraulic analysis, and scour pipe design. Conducted 
a high-level catchment study as well as hydraulic studies on the Rietvlei incoming rising main to 
evaluate its effect on Nooiensfontein Bulk Pipeline, should rehabilitation be undertaken. The 
project comprises the rising main and associated civil works for a new 1 100 ℓ/s sewage pump 
station and a 2.2 km dual DN710 mm rising main for the City of Cape Town. The estimated 
construction cost is R610 million. (2022 – ongoing) 
• 194C-Sewage Pump Stations Ph1 Assessments, Pump Station M and E upgrade: VO5 Catchment 
Study 
The Langa and Raapenberg Sewer Pump Stations Upgrade Project focused on improving the sand traps and upgrading the mechanical and electrical facilities. I conducted a sewer catchment study 
to analyse flows and inform the design for future capacity (2040). To complete the catchment 
study I performed data analysis, engaged stakeholders, including sub-consultants for logging and 
on-site manpower. Maintained regular communication with clients to update project progress. 
Managed project tasks and scheduled deliverables. Recorded meeting minutes and maintained 
project documentation. , Project value: R20 million 
• WGC Bridge and Culvert C1256: Visual inspections of bridges and culverts and reporting on the 
status quo of over 126 structures through STRUMAN Bridge Management System. Project value: 
R 1 mil 
• Upgrade Of National Route R410 Section 1 (Km0.0 To Km37.74) To Section 2 (Km0.0 To Km 3.0): 
Civils 3D, Preparation of Concept drawings to be used for further analysis by Senior engineers. 
Project value: R 860mil-
• Western Cape Schools Maintenance: Structural engineering services, school fencing, responsible 
for monitoring maintenance work being conducted at several schools across the Western Cape. 
Maintenance work included, but not limited to, replacing fences, school expansions, roof 
sheeting and fixing structural defects. Project management, design drawings, site meetings, 
project coordination: Project value: R 500 million. 
• MS84001-0045: Bellvile – Stikland Hospital – Roads Upgrade: Contract documentation, Project 
Management, Site Agent, Cost Controller, Quantity Surveying. Project value: R 10 mil 
• The Upgrade on The National Route R410 Section 1 (Km 0.0 To Km 37.74) To Section 2 (Km 0.0 
To Km3.0) From the R392/R410 T-Junction To Lady Frere (Cacadu): Environmental Subservices, 
Independent Road Safety Audit; Contract documentation, Tender evaluation Report author. 
• The Visual Evaluation and Road Inventory Data Collection on the Western Cape Road Network 
For 2020/21, 2021/22 And 2022/23: Visual Assessment Test, Visual Assessments of the existing 
gravel roads, Project Management 
• National Road R40 Section 5 from Hazyview (km 0.0) to Maviljan (km 32.1): Environmental 
Subservices, Geotechnical Drilling; Sub consultant tender documentation 
• Providing permanent MyCiTi bus stop infrastructure for the Rapid Transit System: Civil 3D Bus 
Stop design and drawing preparations, Investigations on Feasibility of Bus stop locations, design 
drawings, report writing 
• The improvement of National Road R101 Section 8 from Bela Bela (km 0.0) to Modimolle (km 
26.8): Civil 3D, Intersection designs, Road markings drawings according to SARTSM, Strip Map to 
new design, Geotechnical drawings. 
• Witteberg RR WEF: Wind Farm Access Roads Layout and Long section: Civil 3D, Geometric 
Design, Road alignment, Profiles, Corridors 
• Consulting Engineering Services for the Reseal of National Route N2 of Section 16 from 
Mooiplaas (km 49.9) to Komga T-junction (km 70.2): Site Visit and Road inspection, Assessment 
Report, Data Capturing and analysis. 
• NMT Cape Town CBD Traffic Signal installation at various intersections in the 
Cape Town Central Business District: Urban Intersection Designs 
• The improvement of National Road R516 section 1 from Tooyspruit (km 36.67) to Bela Bela (km 83.80): Civil 3D, Geometric Design, Feasibility of adding sidewalk, Intersection Designs 
• Periodic Maintenance – Beaufort West, Designing the maintenance and rehabilitation of the 
TR33/5 between Klaarstroom (km0,0) and Beaufort West (km110,0): Civil 3D, Design of Strip 
map for Rehabilitation works. 
• Esizayo West Wind Farm Access Roads Layout and Long section; Civil 3D, Geometric Design 
(Horizontal and Vertical Design) 
• Designing the maintenance and rehabilitation of the TR33/5 between Klaarstroom (km0,0) and 
Beaufort West (km110,0); Civil 3D, Design of Strip map for Rehabilitation works 

 N. Dip (Civil Eng.), Cape Peninsula University of 
Technology (2020) - NQF 6

Adv. Dip (Civil Eng.), Cape Peninsula University of 
Technology (2021) - NQF 7

Adv. Dip (Project Management), Cape Peninsula 
University of Technology (2022) - NQF 7

BEng Tech (Hons) in Civil Engineering, Cape Peninsula 
University of Technology (2023) - NQF 8 
Dean’s Excellence Award (Best Honours student)

MEng in Engineering Management, Cape Peninsula 
University of Technology (current) – NQF 9